February Meeting

Tuesday February 12, 2013

Process Analytical Technologies

for

Energy Savings in Industrial Processes

Abstract:

Solvent vapor monitoring systems greatly reduce the cost of operating industrial ovens/dryers & oxidizers while at the same time they protect workers and equipment from explosions. This presentation will discuss the various monitoring technologies available for both process and area monitoring applications, and how with the proper selection you can lower energy consumption, reduce fuel costs and improve production rates in manufacturing processes while keeping within the latest safety standards.

About the Speaker:

Debra Hall, Director of Sales, Control Instruments Corporation

Debra Hall has a Bachelor of Science degree in Electrical Engineering (B.S.E.E) from New Jersey Institute of Technology (NJIT), Master’s degree (M.B.A.) in International Marketing from Keller Graduate School of Management, a Consumer Chemistry professor for 3 years with Corporate College Services and has over 15 years’ experience in industrial equipment sales and marketing.

Date

 Tuesday February 12, 2013

Agenda  
                                    Registration           6:00 PM 
                                    Dinner                    6:30 PM 
                                    Program                 7:30 PM
Location

Snuffy’s Restaurant
Mountain and Park Avenues, Scotch Plains

Price

Members and Guests …………………..………..$30

Unemployed/Retired Section members…. $15
Students………………………………………………No Charge

Reservations

 Call Andy Soos at (908) 604-2670 or e-mail at rsvp@njaiche.org by Friday 2/8/13. 

Executive Committee Meeting

The Executive Committee meeting for February will be held on the 5 th at Paisano’s Pizza at 6:30 pm. All members are welcome.

Sponsorship

Some meetings of NJAIChE have been sponsored. If you would like to sponsor this meeting or a future meeting please let us know.  Many levels of sponsorship are available.

Future Meetings

Have you heard someone speak that would be of interest to our group?  Would you like to speak?  We’re interested in both technical and general interest presentations. Let us know.

PDH credits will be awarded when applicable

January Meeting

Tuesday January 15, 2013

CFD Simulations

for

Prediction of Scaling Effects

in

Pharmaceutical Fluidized Bed Processors

at

Three Scales

Abstract:

Effective operation of fluidized bed processors requires even gas distribution and effective gas-particle mixing.  Scaling up a drying process from laboratory to production scale presents unique challenges, such as preventing granule attrition, fines loss, or segregation.  Current methods make optimizing processor performance difficult without large-scale experimentation due to the scale-dependent parameters that affect fluidization.  Fluidization behavior is also dependent on the particle size distribution and mechanical properties of the powder, so it is necessary for these to be considered in simulating a fluidized bed processor.  To predict fluidized bed behavior, it was necessary to choose a numerical method capable of accounting not only for the particle-fluid effects (e.g., drag) but also for particle-wall impacts and particle-particle interactions.

Fluidized bed processors of approximate diameters 140mm, 300mm, and 900mm were simulated using a commercial CFD code with a unique model for particle-fluid simulation.  For each processor, multiple flow rates were simulated at isothermal conditions for processor loadings between 0.15kg and 45 kg of a powder with a size distribution from 2 to 1500 microns diameter.  The simulations modeled both start-up and steady operation of the processors on a full 3D, time-transient basis within a reasonable calculation time (1-2 days).

This study was performed as a “blind test,” with no results shared with the CFD analyst until the simulations were completed.  Simulation results were compared with experimental data for dense phase bed height, elutriated particle trajectory, and patterns in the fluidization flow structure.  Due to scale-dependent effects, the flow structure varied from a pattern approaching spouted flow to a homogeneously fluidized bed.  Observations through the sight glasses were also compared to model predictions.  The simulation results compared well with both the laboratory measurements and qualitative observations. 

The numerical method and simulation approach were found to successfully predict flow behavior of several fluid bed scales, yielding qualitatively correlated information based solely on material properties, processor loading, inlet air flow rate and processor geometry.  This implies that CFD of this kind may be used to assist in determining select operating parameters for pharmaceutical processors and in scaling processes to different sizes to meet production demands.

About the Speaker:

Wei Chen  received his Ph.D from Clarkson University in Mechanical Engineering in 2006. Currently he holds the position of Senior Research Investigator at Bristol-Myers Squibb Co. and was honored with the Chemistry Leadership Award in 2010.   His primary area of work is in modeling including mixing (liquid), dissolution (control release et. al. ), powder blending, fluidized bed and pan drying, reaction kinetics, and fermentation based on the CFD and DEM techniques all for pharmaceutical industry processes.  Most notably, he developed an elegant mathematical model that predicts the relative deviation of tablet content uniformity for the pan coating process.  The model was a key aspect of one of the first Quality by Design New Drug Applications and has been used in several related products which were also approved by the FDA and other health authorities around the globe.  

Date
Tuesday January 15, 2013

Agenda  
                                    Registration           6:00 PM 
                                    Dinner                    6:30 PM 
                                    Program                 7:30 PM
Location
Snuffy’s Restaurant
Mountain and Park Avenues, Scotch Plains

Price
Members and Guests …………………..………..$30

Unemployed/Retired Section members…. $15
Students………………………………………………No Charge

Reservations
Call Andy Soos at (908) 604-2670 or e-mail at rsvp@njaiche.org by Friday 1/11/13. 

Executive Committee Meeting

The Executive Committee meeting for February will be held on the 5 th at Paisano’s Pizza at 6:30 pm. All members are welcome.

Sponsorship

Some meetings of NJAIChE have been sponsored. If you would like to sponsor this meeting or a future meeting please let us know.  Many levels of sponsorship are available.

Future Meetings

Have you heard someone speak that would be of interest to our group?  Would you like to speak?  We’re interested in both technical and general interest presentations. Let us know.

PDH credits will be awarded when applicable

Chemical Engineers!

The January 2013 Newsletter (Vol. 20, Issue1) has  arrived! Please find the link to the newsletter below.

The-NJAIChE-Newsletter-Vol-20-Issue-1

You can also access the past newsletters by clicking here.

-NJAIChE Officers